LR3/Disco 3
Solvents, Sealants and Adhesives
Solvents
The Health and Safety Precautions subsection refers to some commonly used chemicals and materials, hazards
associated with their use, and safety measures to be taken. Some of these chemicals may be included as an ingredient in
a sealer or adhesive.
Sealers
Certain procedures in this manual involve the use of sealants during installation of components. Where a sealant is
required, the application, together with the Land Rover part number is given in the General Specification at the start of
each section and an instruction that a sealant must be used appears in the relevant repair procedure.
It is essential that the sealant(s) specified for a particular procedure are used, DO NOT use any other sealant.
Always remove traces of old sealant using a plastic scraper or suitable solvent, never use emery cloth or metal scrapers.
Adhesives
Whenever a procedure involves the use of an adhesive, the adhesive specified must be used and the manufacturer's
instructions regarding application together with any health and safety precautions must be followed.
WARNING: Always handle all solvents, sealers and adhesives with extreme care. Some contain
chemicals or give off fumes which can be dangerous to health. Always follow the manufacturers instructions. If
in doubt about any substance, particularly a solvent, DO NOT use it.
CAUTION: If in doubt about the suitability of any proprietary solvent or sealer for a particular
application, contact the manufacturer of the product for information.
