LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-2203016.png)
The menu allows the driver to select the following:
^
OFF
^
ON (default)
Lazy Entry (If Memory Module Fitted)
LAZY ENTRY (if memory module fitted)
The 'LAZY ENTRY' menu allows the driver to disable or enable the lazy entry function which moves the exterior door mirror and the seat position to
that set by the driver. The memory positions are stored in the memory module and the individual settings are recognised from the ignition key
identification. The feature can be changed to on or off using the steering wheel + or - buttons.
The menu allows the driver to select the following:
^
OFF (default)
^
ON
Restore Factory Settings
RESTORE FACTORY SETTINGS
The 'RESTORE DEFAULT SETTINGS' menu allows the driver to change all customer settings menus to the factory default settings. The settings are
programmed into the Car Configuration File (CCF) and cannot be overwritten. The defaults can be reset by selecting 'Yes' using the steering wheel + or -
buttons.
The menu allows the driver to select the following:
^
YES
^
NO (default)
Audible Warnings
AUDIBLE WARNINGS
The instrument cluster can generate audible warnings to alert the driver to a displayed message and change of vehicle operating condition. The audible
warning is generated by a sounder located within the instrument cluster. The audible warnings are categorised into one of three types; warning message
indicator lamp alert tones, system status tones and turn signal indicator status tones. The following warning chimes are produced by various vehicle
subsystems:
^
Lights on warning
^
Seat belt warning
^
Turn signal indicator/hazard warning indicator warning
^
Overspeed warning
^
Seat memory warning
^
Front parking aid warning
^
Alarm system warning
^
Key in warning
^
Engine coolant over temperature warning
^
Air suspension warning
^
Tire pressure monitoring warning
^
Adaptive cruise warning
^
Electronic park brake warning
^
Automatic transmission warning
^
Transfer box warning
^
Rear differential warning
^
Brake pad wear warning
^
Low washer fluid warning
^
ABS system fault warning
^
Brake system fault warning
^
Dynamic stability control fault warning
^
Hill descent control fault warning
^
Hill descent control active warning
^
Hill descent control information warning
^
Supplementary restraint system warning
^
Engine management system warning
^
Low engine oil pressure
^
Trip computer overspeed.
The audible warning takes the form of either a single chime, a double chime or a repeating chime. The audible warnings are initiated by a CAN bus
