LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-2242001.png)
Amplifier: Service and Repair
Audio Amplifier
Removal
1. Disconnect the battery ground cable.
2. Remove the RH front seat.
CAUTION: Cover fibre optic cable connectors to minimise dust ingress and avoid bending the cables in a radius of less than 30 mm.
3. Remove the amplifier.
^
Remove the 4 bolts.
^
Disconnect the 5 electrical connectors.
Installation
1. Install the amplifier.
^
Install the bolts and tighten to 10 Nm (7 ft. lbs.).
^
Connect and secure the electrical connectors.
2. Install the front seat.
3. Connect the battery ground cable.
