LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-2370003.png)
10. Remove the 9 clips.
Installation
1. Install the window control switch.
^
Secure with the clips.
2. Install the tweeter.
^
Secure with the clips.
3. Install the puddle lamp.
4. Install the rear door latch remote control handle.
5. Install the clips.
6. Install the rear door trim panel.
^
Connect the electrical connectors.
^
Connect the door latch remote control cable.
^
Secure with the clips.
^
Tighten the screws.
7. Install the screw securing the door latch remote release.
^
Secure the screw cover.
8. Install the grab handle cover.