LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-2433004.png)
Installation
1. Install the headliner wiring harness.
^
Secure the wiring harness to the headliner.
2. Install the interior lamp.
^
Secure with the clip.
^
Connect the electrical connector.
^
Repeat the above procedure for the other side.
3. With assistance, carefully install the headliner.
^
Secure with the clips.
4. Connect the headliner wiring harness rear electrical connector.
5. Install the rear headliner trim panel.
^
Secure the clips.
6. Reposition the rear seats.
7. Reposition the front seats.
8. Install the passenger assist handles.
^
Install the screws.
^
Secure the screw covers.
9. Install the sun visors.
^
Install the clips.
^
Install the screws.
^
Install the screw covers.
^
Connect the electrical connectors.
10. Connect the RH A-pillar electrical connector.
11. Install the rear overhead console.
^
Connect the electrical connectors.
^
Carefully secure the clips.
12. Install the front overhead console.
^
Connect the electrical connectors.
^
Carefully secure the clips.
13. Install both D-pillar upper trim panels.
14. Install both C-pillar upper trim panels.
15. Install both B-pillar upper trim panels.
16. Install both A-pillar upper trim panels.
