LR3 (LA) V6-4.0L (2006)
Trim Panel: Service and Repair
A-Pillar Trim Panel
A-Pillar Trim Panel (76.13.26)
Removal
1. Release the door weatherstrip to access the A-pillar upper trim panel and instrument panel end panel.
2. Remove the instrument panel end panel.
^
Release the clip.
3. Remove the A-pillar upper trim panel.
^
Release the screw cover.
^
Remove and discard the Torx screw.
^
Release the clip.
4. NOTE: Do not disassemble further if the component is removed for access only.
Remove the screw retainer and clip from the A-pillar upper trim panel.
Installation