LR3 (LA) V6-4.0L (2006)
^
Release the 4 clips.
^
Disconnect the electrical connector.
4. NOTE: Do not disassemble further if the component is removed for access only.
Remove the speaker.
^
Remove the 3 screws.
Installation
1. To install, reverse the removal procedure.
^
Tighten the new Torx bolt to 40 Nm (30 lb.ft).
Front Door Trim Panel
Front Door Trim Panel
Removal
CAUTION: Release the 2 lower clips first, use the access holes.
1. Remove the grab handle cover.
^
Release the 4 clips.
2. Release the front door trim panel.
^
Release the 2 screw covers.
^
Remove the 8 screws.
^
Release the 12 clips.