LR3 (LA) V6-4.0L (2006)
6. Remove the passenger assist handle.
^
Release the 2 screw covers.
^
Remove the 2 screws.
^
Repeat the above procedure for the other side.
7. Lower the headliner for access.
^
Release the 4 clips.
8. Remove the roof opening panel motor.
^
Disconnect the electrical connector.
^
Remove the 3 Torx screws.
^
Remove the spacer.
Installation
1. Install the roof opening panel motor.
^
Install the spacer.
^
Tighten the Torx screws to 4 Nm (3 lb.ft).
^
Connect the electrical connector.
2. Position the headliner.
^
Secure with the clips.
3. Install the passenger assist handles.