LR3 (LA) V6-4.0L (2006)
1.
Open the second row glass roof panel blind. Visually inspect the rubber spacers between the headliner and the glass of the second row (Check
mark in Figure 1) to verify the spacer is touching the glass.
NOTE:
Gapping will show when the dome lamp has not been installed correctly. (Figure 3)
2.
Verify the dome lamp is installed correctly with no gaps between lamp and headliner. (Figure 2)
3.
If the lamp is not fully clipped into the roof, apply pressure as indicated by the arrow. (Figure 3)
4.
Verify the two white clips at the front and rear of the roof opening panel headliner are fully clipped into the body.