LR3 (LA) V6-4.0L (2006)
^
Tighten the screw.
5. Install the rear seat release handle.
6. Install the rear seat head restraint retaining clips.
7. Install the rear seat head restraint.
8. Install the luggage strap tether.
9. Install the rear seat cushion side finisher.
^
Tighten the screws.
10. Install the outer backrest hinge cover.
^
Tighten the screws.
^
Tighten the screw.
11. Install the inner backrest hinge cover.
^
Attach the clips.
^
Tighten the screw.
^
Attach the backrest cover side clip.
Rear Seat Backrest Cover - Vehicles With: 60/40 Split Seat
Rear Seat Backrest Cover - Vehicles With: 60/40 Split Seat
Service Repair No - 78.90.72
Removal
NOTE: This procedure shows the removal of both the LH and RH covers.
1. LH seat only: Remove the safety belt retractor cover and guide.
^
Remove the 2 screws.
2. Remove the rear seat release handle.
3. Remove the rear seat release handle finisher.
^
Remove the screw.