LR3 (LA) V6-4.0L (2006)
Tailgate Latch: Service and Repair
Tailgate Latch
Service Repair No - 76.37.83
Removal
1. Remove the tailgate speaker assembly.
2. Remove the tailgate latch assembly.
^
Remove the 3 Torx bolts.
^
Disconnect the electrical connector.
^
Remove the latch.
^
Remove the latch plate.
^
Remove the latch actuator assembly.
3. NOTE: Do not disassemble further if the component is removed for access only.
Remove the latch actuator.
^
Remove the 2 screws.
Installation
1. Install the latch actuator.
^
Tighten the screws.
2. Install the tailgate latch assembly.
^
Install the latch actuator assembly.
^
Install the latch plate.
^
Install the latch.
^
Tighten the Torx screws to 25 Nm (18 lb.ft).
^
Connect the electrical connector.
3. Install the tailgate speaker assembly.
4. Adjust both the tailgate strikers.