LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-1475002.png)
7. Remove the brake caliper upper bolt.
8. Remove the brake caliper housing.
Installation
1. WARNING: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled.
Clean the caliper housing and anchor plate using brake cleaning fluid.
2. Install the brake caliper.
3. Install the brake caliper upper bolt.
^
Tighten the bolt to 35 Nm (26 ft. lbs.).
4. Install the brake pads.
^
Install the two clips.
5. Rotate the brake caliper downwards.
^
Tighten the bolt to 35 Nm (26 ft. lbs.).
6. Connect the brake hose to the brake caliper.
^
Remove the blanking caps from the ports.
^
Install new sealing washers.
^
Tighten the brake hose union to 32 Nm (24 ft. lbs.).
7. Connect the brake pad wear indicator sensor.
8. Install the wheel and tire.
^
Tighten the wheel nuts to 140 Nm (103 ft. lbs.).
9. Bleed the brake system.
