LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-1484002.png)
6. Remove the brake disc.
^
Remove the Torx screw.
Installation
1. Make sure the brake disc and hub mating surfaces are clean.
2. Install the brake disc.
^
Tighten the Torx screw to 35 Nm (26 ft. lbs.).
3. Install the brake caliper anchor plate.
4. Adjust the parking brake.
5. Install the wheel and tire.
^
Tighten the wheel nuts to 140 Nm (103 ft. lbs.).
