LR3 (LA) V6-4.0L (2006)
10. Release the RH parking brake cable.
^
Remove the 2 bolts.
^
Release the parking brake cable from the 2 pipe clips.
^
Release the cable from the clip on the chassis.
11. Release the RH parking brake cable.
CAUTION: Make sure that no dirt or moisture enters the actuator during cable replacement.
12. Remove the RH parking brake cable.
^
Release the retaining nut.
^
Release the cable retaining clip.
^
Release and remove the cable.
Installation
1. Install the RH parking brake cable.
^
Install the cable.
^
Install the cable retaining clip.
^
Tighten the retaining nut.
2. Secure the fuel tank breather line bracket.
^
Install the plastic insert.
3. Locate and secure the RH parking brake cable.
^
Tighten the bolts to 22 Nm (16 ft. lbs.).
^
Secure the parking brake cable to the 2 pipe clips.
^
Secure the cable grommet to the integrated body frame bracket.