LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-1517002.png)
9. Release the parking brake shoe adjustment.
^
Remove the plug from the access hole in the brake disc.
^
Using a suitable tool, rotate the brake shoe adjuster to release the adjustment.
^
Install the access plug.
10. Remove the LH rear brake disc.
^
Remove the Torx screw.
11. Remove the adjuster and return spring.
^
Release the parking brake shoe adjuster to the minimum adjustment.
12. WARNING: Make sure the return spring and the adjuster spring are correctly installed to the primary shoe.
Remove the primary brake shoe.
^
Remove the hold-down spring and retaining pin.
^
Pivot the shoe to release it from the spreader plate and return spring.
13. Remove the spreader plate and spring.
