LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-1517004.png)
18. WARNING: Make sure the return spring and the adjuster spring are correctly installed to the primary shoe.
Remove the primary brake shoe.
^
Remove the hold-down spring and retaining pin.
^
Pivot the shoe to release it from the spreader plate and return spring.
19. Remove the spreader plate and spring.
20. Remove the return spring.
21. Remove the secondary brake shoe.
^
Remove the hold-down spring and retaining pin.
^
Release the parking brake cable.
^
Disconnect the parking brake cable retaining spring from the brake shoe lever.
Installation
