LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-1552002.png)
^
Disconnect the 2 electrical connectors.
5. Remove the selector lever panel.
Installation
1. Install the selector lever panel.
2. Install the ride and handling optimization switch assembly.
^
Connect the electrical connectors.
^
Secure the selector lever trim panel.
3. CAUTION: Only fit the selector knob when the selector lever is in the 'P' position.
Install the selector lever knob. Engage the locating tang of the knob with the slot in the selector lever. Push the knob fully onto the selector lever.
