LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-594001.png)
Access Cover: Service and Repair
Engine Cover - 4.0L (12.30.50)
Removal
1. Disconnect the battery ground cable.
2. Remove the oil filler cap.
3. NOTE: Note the fitted position of the spacers.
Remove the engine cover.
^
Remove the 4 nuts.
^
Collect the spacers.
4. NOTE: Do not disassemble further if the component is removed for access only.
Remove the acoustic pad.
^
Remove the 7 clips.
^
Remove the 4 mounts and compression limiters.
Installation
1. Install the acoustic pad.
^
Position and secure the clips.
^
Install the grommets.
^
Install the compression limiters.
2. Install the engine cover.
^
Install the spacers.
^
Tighten the nuts to 10 Nm (7 lb.ft).
3. Connect the battery ground cable.
