LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-630001.png)
Idler Pulley: Service and Repair
Accessory Drive Belt Idler Pulley
Service Repair No - 86.10.23
Removal
1. Disconnect the battery ground cable.
2. Remove the generator drive belt.
3. Remove the accessory drive belt idler pulley.
^
Remove the bolt.
Installation
1. Install the accessory drive belt idler pulley.
^
Tighten the bolt to 45 Nm (33 ft. lbs.).
2. Install the generator drive belt.
3. Connect the battery ground cable.