LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-647001.png)
Intake Manifold: Specifications
Torque Specifications
*Intake manifold bolts ................................................................................................................................................................................. 10 Nm (7 ft. lbs.)
New nuts/bolt(s) must be fitted ** New Torx bolts must be fitted + Bolts/Torx bolts/studs must be tightened in sequence - Bolts must be tightened in a
diagonal sequence commencing with the 2 center bearing caps # Lubricate threads of bolts with engine oil prior to fitting +* Damage to internal
components will result if this torque is exceeded
