LR3 (LA) V6-4.0L (2006)
8. Locate recirculation flap lever. (Figure 13)
WARNING:
Observe all applicable health and safety precautions; wear protective gloves.
WARNING:
Use only grease LR020046.
9. Apply grease to the lever slide: (Figure 14)
^ Approximate quantity as shown in Figure 14.
10. Turn ignition 'ON'.
11. Alternately select 'Recirculation' and 'Fresh Air' mode on the climate control panel to open / close the recirculation flap, distributing the grease on the
lever.
^ It may be necessary to repeat the open / close cycle 10 times.
12. Verify noise has been eliminated.
13. Turn ignition 'OFF'.
14. If squeak / squeal noise is still evident, repeat steps 9 - 13.
15. Install stowage compartment tray.
16. Install the stowage compartment side trim panel
17. Install the center reinforcement trim panel.
18. Install the audio side trim panel.