landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 9118 > < Diagram Information and Instructions|Page 9116
Page 1
background image

Compressor HVAC: Service and Repair

Air Conditioning (A/C) Compressor

Service Repair No - 82.20.93

Removal

1. Disconnect the battery ground cable.

WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands

2. Raise and support the vehicle.
3. Recover the A/C refrigerant.
4. Remove the accessory drive belt.
5. Remove the accessory drive belt tensioner.

^

Remove the bolt.

6. Remove the oil level indicator and tube.
7. Remove the LH front wheel.

CAUTION: Immediately cap all refrigerant lines to prevent ingress of dirt and moisture.

8. Disconnect the refrigerant lines from the A/C compressor.

^

Remove the 2 bolts.

^

Remove and discard the 2 O-ring seals.

9. Disconnect the A/C clutch electrical connector.

NOTE: 1 A/C compressor bolt will remain captive until the mounting bracket is removed.

10. Release the A/C compressor.

^

Remove the 3 bolts.

Diagram Information and Instructions|Page 9118 > < Diagram Information and Instructions|Page 9116