LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-2002002.png)
12. Disconnect 2 central junction box (CJB) electrical connectors.
13. Disconnect 2 electrical connectors from the instrument panel center reinforcement.
CAUTION: Cover fibre optic cable connectors to minimise dust ingress and avoid bending the cables in a radius of less than 30 mm.
14. If installed, disconnect the instrument panel center reinforcement fibre optic cables.
^
Disconnect the electrical connector.
15. Remove the heater housing center ducts.
16. Disconnect the steering column intermediate shaft from the steering column.
^
Note the fitted position.
^
Remove the special bolt and discard the nut.
