LR3 (LA) V6-4.0L (2006)
17. Release the heater housing from the instrument panel carrier.
^
Remove the 7 Torx screws.
18. Remove the plenum chamber panel.
19. Remove the instrument panel carrier to bulkhead Torx bolt.
20. With assistance, remove the instrument panel.
^
Remove the 6 Torx bolts.
CAUTION: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean. Plug open connections
to prevent contamination.
21. Disconnect 2 heater hoses from the bulkhead.
^
Release the 2 clips.