LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-2002004.png)
22. Release 2 A/C lines from the body.
^
Remove the nut.
CAUTION: Immediately cap all refrigerant lines to prevent ingress of dirt and moisture.
23. Release 2 A/C lines from the bulkhead.
^
Remove the bolt.
^
Remove and discard the O-ring seals.
24. Remove the 2 adaptor panels.
^
Remove the 4 nuts.
25. Disconnect 2 drain tubes from the heater housing.
