LR3 (LA) V6-4.0L (2006)
10. Disconnect both horn electrical connectors.
11. If installed, disconnect the speed control module electrical connector.
12. If installed, disconnect the pollution sensor electrical connector.
^
Release the clip.
^
Release the grommet.
13. Release the hood release cable.
^
Release from the 3 clips.
14. Disconnect the front bumper wiring harness electrical connector.
15. With assistance, remove the BJB and wiring harness.
Installation
All vehicles
1. With assistance, install the BJB and wiring harness.
2. Connect the front bumper wiring harness electrical connector.
3. Attach the hood release cable.
^
Secure with the clips.