LR3 (LA) V6-4.0L (2006)
Knock Sensor: Service and Repair
Knock Sensor (KS) RH
Knock Sensor (KS) RH
Service Repair No - 18.30.30
Removal
1. Disconnect the battery ground cable.
2. Remove the intake manifold.
3. Remove the KS.
^
Disconnect the electrical connector.
^
Release the RH KS electrical connector retaining clip.
^
Remove the bolt.
Installation
1. To install, reverse the removal procedure.
^
Clean the component mating faces.
^
Tighten the bolt to 20 Nm (15 ft. lbs.).