landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Recall - Air Bag Clockspring Wiring Fracture|Page 9655 > < Recall 08V248000: Air Bag System Modification
Page 1
background image

Technical Service Bulletin # P045

Date: 080722

Recall - Air Bag Clockspring Wiring Fracture

No.: P045

Issue: 1

Date: 22 July 2008

SECTION: 501

RECALL: Rotary Coupler Wiring Fracture

AFFECTED VEHICLE RANGE

CONDITION SUMMARY:

Situation: 

Land Rover is initiating a voluntary safety recall on the vehicles in the affected VIN ranges. It is possible that the wires that connect the driver's airbag
module to the rotary coupler on LR3 and Range Rover Sport vehicles could fracture. This may lead to an open circuit and the Supplemental Restraints
System (SRS) warning light being illuminated on the instrument cluster.

The wiring that connects the rotary coupler to the driver's air bag module may fracture as a result of relative motion between the rotary coupler and the
steering wheel hub. This relative motion may be caused by factors such as internal friction within the rotary coupler assembly and friction caused by
contact of the steering column cowl against the rotary coupler. Rotary coupler internal friction is caused by distortion of the steering column switch
mounting platform as a consequence of misalignment of a location point on the steering column assembly.

Action:

Under the provisions of this Recall action, a modification to the steering column switchgear will be made. For certain VINs, if upon inspection of the
rotary coupler the part number is determined to be YRC500060, a new rubber sleeve will be installed.

PARTS

TOOLS:

Refer to Workshop Manual (GTR) for any special tools (if necessary).

Recall - Air Bag Clockspring Wiring Fracture|Page 9655 > < Recall 08V248000: Air Bag System Modification