LR3 (LA) V6-4.0L (2006)
Seat Belt Buckle: Service and Repair
Front Safety Belt Buckle
Front Safety Belt Buckle
Service Repair No - 76.73.30
Removal
WARNING:
^
It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly.
^
Always disconnect both battery cables before beginning work on the SRS system. Disconnect the ground cable first. Never reverse
connect the battery.
1. Disconnect the battery ground cable.
2. Make the SRS system safe.
3. Remove the front seat.
4. Remove the seat backrest hinge cover.
^
Remove the 2 screws.
5. Remove the front safety belt buckle.
^
Remove the Torx bolt.
^
Disconnect the 2 electrical connectors.
^
Release the wiring harness.
Installation
1. Install the front safety belt buckle.
^
Tighten the Torx bolt to 40 Nm (30 ft. lbs.).
^
Connect the electrical connectors.
^
Attach the wiring harness.
2. Install the seat backrest hinge cover.