LR3 (LA) V6-4.0L (2006)
Seat Belt Buckle: Service and Repair
Rear Safety Belt Buckle RH - Vehicles With: 60/40 Split Seat
Rear Safety Belt Buckle RH - Vehicles With: 60/40 Split Seat
Service Repair No - 76.73.62
Removal
1. Fold the seat cushion forward.
^
Fold the seat cushion forward.
^
Remove and discard the 4 Torx bolts.
^
Fold down the rear seat backrest.
2. Remove the RH rear seat.
3. Remove the rear seat cushion side finisher.
^
Remove the screw.
4. Remove the safety belt buckle.
^
Raise the seat cushion.
^
Release the retaining strap.
^
Remove and discard the bolt.
Installation
1. Install the safety belt buckle.
^
Tighten the Torx bolt to 40 Nm (30 ft. lbs.).
^
Attach the retaining strap.
^
Lower the seat cushion.
2. Install the rear seat cushion side finisher.
^
Tighten the screw.
3. Install the RH rear seat.