LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-277002.png)
6. Release the steering column gaiter panel.
^
Remove the 2 Torx screws.
^
Release the 2 clips.
7. Remove the in-vehicle temperature sensor.
^
Release the 2 clips.
^
Disconnect the electrical connector.
^
Disconnect the hose.
Installation
1. Install the in-vehicle temperature sensor.
^
Connect the hose.
^
Connect the electrical connector.
^
Secure the clips.
2. Install the steering column gaiter panel.
^
Secure with the clips.
^
Tighten the Torx screws.
3. Install the steering column side trim panels.
^
Secure with the clips.
