LR3 (LA) V6-4.0L (2006)
^
Click the [Check Mark] tick-box to continue and follow the on-screen instructions.
^
Note the on-screen software part number information that WDS/IDS will display.
9.
Compare the Ride Level Control Module software part number displayed on WDS/IDS to the software part number noted in step 7 above.
10.
If the same software part number is displayed, terminate the tune download.
11.
If a different software part number is displayed, complete the tune download to update the software.
12.
After the tune download is complete, respond to the WDS/IDS prompt to calibrate the air suspension ride height as follows:
^
Click [Check Mark] tick-box to continue if the VIN is prior to 5A352042 and the previous software level NNV503111 was installed.
^
Click [X] tick-box to skip prompt if the VIN is 5A352042 or later and the previous software level installed was not NNV503111.
13.
Exit the WDS/IDS session and disconnect the diagnostic equipment from the vehicle.
Disclaimer