LR3 (LA) V6-4.0L (2006)
Rear Cross-Member: Service and Repair
Transmission Support Crossmember (76.10.09 or 76.10.92)
Removal
All vehicles
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the transmission undershield.
^
Remove the 6 bolts.
Vehicles with diesel engine
3. Release the 3 fuel lines.
^
Release from the 3 clips.
4. Release the exhaust front mounting.
Vehicles with petrol engine
5. Release the HO2S wiring harness and bracket from the crossmember.
^
Remove the 2 bolts.
^
Tie the bracket aside.