LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-1798002.png)
Special Service Tools
Removal
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the wheel and tire.
3. Loosen the halfshaft retaining nut.
4. Remove the brake disc.
5. Remove the halfshaft retaining nut.
^
Discard the nut.
6. Loosen the tie-rod end ball joint retaining nut.
7. Using the special tool, release the tie-rod end ball joint from the wheel knuckle.
^
Discard the nut.
8. Release the wheel speed sensor from the wheel knuckle.
^
Remove the bolt.
