LR3 (LA) V6-4.0L (2006)
NOTE:
IDS must be loaded with IDS-DVD119_V8.03 or later and Calibration File 21 or later.
2. Connect the Integrated Diagnostic System (IDS) to the vehicle and begin a new Symptom Driven Diagnostics (SDD) session.
3. Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle.
4. From the Session screen, select the Diagnosis tab.
5. Select the Selected Symptoms tab, and then select:
^
Chassis > Suspension system > Vehicle dynamic suspension
6. Select continue.
7. Select the Recommendations tab.
8. Configure the Ride level control module.
^
Follow all on-screen instructions to complete this task.
9. Exit the current session.
10. Disconnect the IDS and the Midtronics Vehicle Power Supply from the vehicle.
Disclaimer