LR3 (LA) V6-4.0L (2006)
Suspension Control Module: Service and Repair
Air Suspension Control Module
Service Repair No - 60.50.04
Removal
1. Driver side: Remove the cowl side trim panel.
2. Remove the closing trim panel.
^
Release the clip.
^
Remove the 2 screws.
^
Disconnect the electrical connector.
3. Remove the air suspension control module.
^
Disconnect the 4 electrical connectors.
^
Remove the bolt.
^
Release from the 2 clips.
Installation
1. Install the air suspension control module.
^
Secure with the clips.
^
Connect the electrical connectors.
^
Tighten the bolt to 9 Nm (7 ft. lbs.).
2. Install the closing trim panel.
^
Connect the electrical connector.
^
Secure the clip.
^
Tighten the screws.
3. Install the cowl side trim panel.
4. Initiate a new control module using T4.