landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Procedures|Page 5245 > < Procedures|Page 5243
Page 1
background image

Fluid - A/T: Removal and Replacement

Transmission Fluid Drain and Refill (44.24.02) 

WARNING: Observe due care when draining transmission fluid as the fluid can be very hot. 

WARNING: Observe due care when working near a hot exhaust system. 

1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. 

Raise and support the vehicle.

2. Remove the transmission undershield.

^

Remove the 6 bolts.

3. If installed, remove the transmission heat shield.

^

Remove the 4 bolts.

4. Remove the transmission support insulator through-bolt.

^

Raise the transmission to gain access to the fluid drain plug.

5. Clean the area around the transmission fluid drain and filler plugs.
6. Place a container under the transmission.

Procedures|Page 5245 > < Procedures|Page 5243