LR3 (LA) V6-4.0L (2006)
Check for correct cable adjustment.
^
Move the selector lever from 'P' position, check engagement in each position and return to 'P'.
^
Check that the engine will start in 'P' and 'N' positions and that the engine start is inhibited when drive positions are selected.
7. If installed, install the transmission heat shield.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
8. Install the transmission undershield.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).