LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-1243001.png)
Shift Cable: Service and Repair
Selector Lever Cable
Service Repair No - 44.15.08
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the transmission selector lever.
3. Remove the selector lever cable.
^
Remove the clip.
^
Release the cable.
Installation
1. Install the selector lever cable.
^
Clean the components.
^
Secure the cable.
^
Install the clip.
2. Install the transmission selector lever.
