LR3 (LA) V6-4.0L (2006)
Special Service Tools
Removal
CAUTION: Do not store or install halfshafts with joints at maximum articulation or damage may occur to the joint.
CAUTION: Do not allow halfshafts to hang unsupported at one end or joint damage will occur.
CAUTION: Angularly Adjusted Roller (AAR) joints, used at the inboard end of some halfshafts have no internal retaining mechanism and can
separate.
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the Halfshaft Seal LH Page 3 of 3 vehicle on
safety stands.
Raise and support the vehicle.
2. Remove the LH halfshaft.