LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-2842001.png)
Windshield Washer Reservoir: Service and Repair
Windshield Washer Reservoir
Removal
1. Remove the front bumper.
2. Remove the windshield washer reservoir filler neck.
^
Release the washer reservoir filler neck from the coolant tank clip.
^
Remove and discard the seal.
NOTE: Some fluid spillage is inevitable during this operation.
3. Remove the windshield washer reservoir.
^
Remove the bolt.
^
Drain the washer reservoir fluid.
^
Disconnect the 3 electrical connectors.
^
Disconnect the 3 hoses.
NOTE: Do not disassemble further if the component is removed for access only.
4. Remove the windshield washer pump.
