LR3 (LA) V6-4.0L (2006)
Wiper Arm: Service and Repair
Front Wiper Pivot Arm
Front Wiper Pivot Arm
Removal
1. Noting the fitted position, remove the front wiper pivot arm.
^
Remove the nut cover.
^
Remove the nut.
NOTE: Do not disassemble further if the component is removed for access only.
2. Remove the wiper blade.
^
Release the clip.
Installation
1. To install, reverse the removal procedure.
^
Tighten the nut to 18 Nm (13 ft. lbs.).