LR3 (LA) V8-4.4L (2009)
/v8-4.4l/Page-1822002.png)
8. Remove the headlamp washer jet hose.
Release from the 5 clips.
Installation
1. Install the headlamp washer jet hose.
^
Secure in the 5 clips.
2. Install the parking aid sensor wiring harness.
^
Install the securing straps.
3. Install the parking aid sensors.
^
Connect the parking aid electrical connectors.
4. Install the washer jets.
5. Install the front bumper cover.
^
Connect the parking aid sensor wiring harness electrical connectors.
^
Connect the head lamp washer jet hose to the washer pump.
^
Install the screws.
6. Install the fender mouldings.
