LR3 (LA) V8-4.4L (2009)
/v8-4.4l/Page-1827002.png)
^
Remove the cable from the lever.
8. LH side: Release the door lock cylinder cable from the door latch.
^
Release the cable from the abutment bracket.
^
Remove the cable from the lever.
Installation
1. LH side: Connect the door lock cylinder cable to the door latch.
^
Connect the cable to the lever.
^
Secure the cable to the abutment bracket.
2. Connect the door exterior handle mechanism cable to the door latch.
^
Connect the cable to the lever.
^
Secure the cable to the abutment bracket.
3. Install the remote control cable to the door latch.
^
Connect the cable to the lever.
^
Secure the cable to the abutment bracket.
4. Set the exterior handle mechanism.
^
Rotate the lever.
^
Engage the retaining tang.
5. Install the front door latch assembly.
^
Tighten the Torx screws to 10 Nm (7 lb.ft).
^
Connect the electrical connector.
6. Install the door exterior handle mechanism.
^
Position the mechanism to the door.
^
Fit the locking pin.
^
Fit and tighten the Torx screw.
7. LH side: Position the control cables into the retainers.
