LR3 (LA) V8-4.4L (2009)
/v8-4.4l/Page-1955002.png)
7. Remove the front seat height adjustment motor.
^
Disconnect the electrical connector.
^
Remove the 8 nuts.
Installation
1. Install the front seat height adjustment motor.
^
Tighten the nuts to 25 Nm (18 lb.ft).
^
Connect the electrical connector.
2. Install the front seat position sensor.
^
Tighten the nuts to 4 Nm (3 lb.ft).
3. Install the front seat tilt motor.
^
Tighten the Torx bolts to 10 Nm (7 lb.ft).
^
Attach the wiring harness.
4. Install the front seat electrical connector bracket.
^
Tighten the screws.
5. Install the front seat backrest assembly.
^
Tighten the Torx bolts to 25 Nm (18 lb.ft).
^
Connect and secure the electrical connectors.
6. Install the front seat cushion assembly.
7. Install the front safety belt buckle.