LR3 (LA) V8-4.4L (2009)
10. Remove the rear seat backrest assembly.
^
Remove the 3 Torx bolts.
11. Release the rear seat backrest cover.
^
Release the 5 clips.
12. Remove the rear seat backrest cover.
^
Remove the 16 hog rings.
Installation
1. Install the rear seat backrest cover.
^
Install the 16 hog rings.
^
Attach the 4 clips.
2. Install the rear seat backrest assembly.
^
Tighten the Torx bolts to 45 Nm (33 lb.ft).
3. Connect the backrest heater mat electrical connector.
^
Attach the rear seat cushion side clip.
4. Install the rear seat release handle finisher.