LR3 (LA) V8-4.4L (2009)
/v8-4.4l/Page-1971003.png)
Installation
1. Install the rear seat cushion cover.
^
Install the hog rings.
^
Install the clips.
2.Install the rear safety belt buckle.
^
Attach the spring.
^
Tighten the Torx bolt to 45 Nm (33 ft. lbs.).
3. Install the seat cushion finishers.
^
Tighten the screws.
4. Install the seat front release strap finisher.
^
Remove the screw.
^
Tighten the screw.
5. Install the seat rear release strap finisher.
^
Tighten the screw.
6. Install the inner backrest hinge cover.
^
Attach the clips.
^
Tighten the screw.
7. Install the outer backrest hinge cover.
^
Tighten the screw.
^
Fold seat assembly rearwards.
8. Install the rear seat cushion side finisher.
^
Tighten the screws.
