LR3 (LA) V8-4.4L (2009)
Clean the caliper housing and anchor plate using brake cleaning fluid.
2. Clean and lubricate the guide pins.
3. Install the guide pins.
4. Install the anchor plate.
^
Tighten the bolts to 115 Nm (85 ft. lbs.).
5. Install the brake caliper housing and fit the top bolt.
^
Tighten the bolt to 35 Nm (26 ft. lbs.).
6. Install the brake pads.
^
Install the 2 clips.
7. Rotate the brake caliper downwards.
^
Tighten the bolt to 35 Nm (26 ft. lbs.).
8. Connect the brake pad wear indicator sensor.
9. Install the wheel and tire.
^
Tighten the wheel nuts to 140 Nm (103 ft. lbs.).