LR3 (LA) V8-4.4L (2009)
/v8-4.4l/Page-574002.png)
4. NOTE: The thread is left handed.
Using the special tools, remove the cooling fan.
^
Remove the cooling fan assembly.
5. NOTE: Do not disassemble further if the component is removed for access only. Remove the viscous coupling from the cooling fan.
Remove the 4 bolts.
Installation
1. To install, reverse the removal procedure.
^
Install the cooling fan to the viscous coupling, tighten the bolts to 10 Nm (7 ft. lbs.).
^
Tighten the cooling fan assembly to 65 Nm (48 ft. lbs.).
