LR3 (LA) V8-4.4L (2009)
/v8-4.4l/Page-538004.png)
NOTE: Do not disassemble further if the component is removed for access only.
18. Remove the NVH pad from the RH side of the intake manifold.
19. Remove the intake manifold casting.
^
Disconnect the vacuum hose from the intake manifold.
^
Remove the 4 bolts.
20. Remove the intake manifold MAP sensor housing.
^
Remove the 7 bolts.
21. Remove the fuel rail.
^
Remove the 4 Torx bolts.
^
Release the fuel injectors.
^
Discard the fuel injector O-ring seals.
22. Remove the fuel injector housings.
^
Remove the 10 Torx screws.
^
Release the fuel injector housings and discard the gaskets.
